Working for a system integrator is one of the fastest ways for an automation technician to see a lot of equipment in a short time. In one year you might touch three PLC platforms, two robot brands and a dozen plants. You will also spend nights in hotels, work long startup shifts and answer to a customer who wants the line running yesterday.
This article focuses on what is specific to integrator jobs: how projects actually move, how travel and per diem work under federal rules, and how to size up an integrator before you accept. If you are still deciding between plant maintenance and field work in general, read our comparison of local shop and traveling crew jobs first, then come back here.
What a System Integrator Actually Does
A control system integrator is a company that designs, builds, programs and starts up automation systems for other businesses. The customer might be a food plant adding a palletizing cell, a water utility upgrading its SCADA system or a parts maker replacing a 25-year-old relay panel with a PLC. The integrator takes a scope of work, engineers it, builds panels, writes code, tests it and installs it.
Integrators range from a handful of people to large multi-office firms. The main trade group in North America is the Control System Integrators Association (CSIA), founded in 1994 and based in Madison, Wisconsin. It reported more than 500 member companies as of 2017.
For a technician, the integrator side usually means roles like panel builder, controls technician, field service technician or startup and commissioning technician. Larger firms separate these. Smaller ones expect one person to wire in the shop on Monday and commission in another state by Thursday.
How Integrator Projects Run, Step by Step
Plant work is driven by uptime. Integrator work is driven by project phases and deadlines. Knowing the phases tells you where your time will go.
| Phase | What happens | Where you are | Your likely role |
|---|---|---|---|
| Design and engineering | Drawings, I/O lists, network layout, code structure | Office | Limited, unless you help with markups and parts lists |
| Panel build | Enclosures built and wired to drawings | Integrator shop | Wiring, labeling, point-to-point checks |
| Factory acceptance test (FAT) | Customer witnesses the system working before it ships | Integrator shop | I/O checkout, simulation support, fixing punch-list items |
| Installation | Panels set, field devices mounted, wiring pulled and terminated | Customer site | Supervising electricians or doing terminations, loop checks |
| Commissioning and site acceptance test (SAT) | System proven on real equipment with real product | Customer site | Long days, troubleshooting, tuning, training operators |
| Support and warranty | Fixes, tweaks, service calls | Remote or site | On-call, return trips |
The factory acceptance test is a check that the equipment is complete, meets the contract and works as specified, usually by simulation or functional testing, before installation. The site acceptance test follows at the customer's location after the system is moved in. Most travel happens in the last three rows of that table, and most of the stress happens in the commissioning row.
Travel and Schedules When Working for a System Integrator
Travel varies more by employer than by title. Some integrators serve customers within driving distance and rarely put you on a plane. Others work nationally and plan on technicians being out for weeks at a time during startup season. Ask for the number, not an adjective. "Some travel" can mean anything.
A few patterns are common across integrator work:
- Startups compress time. The customer has a production date and a downtime window. When a project slips earlier in the schedule, the field team absorbs it at the end.
- Shutdown work lands on holidays. Plants schedule upgrades when lines are already down, which often means the week of July 4 or the end of December.
- Remote support stretches the day. Even when you are home, a customer on another shift may call about a fault in code you wrote.
When travel counts as paid time
If you are paid hourly (non-exempt), federal wage rules decide which travel hours count. The Department of Labor's Fact Sheet #22 on hours worked says:
- Normal commuting from home to your regular worksite is not work time.
- A one-day trip to another city and back is work time, minus your usual commute.
- Overnight travel is work time when it cuts across your normal working hours, and that includes the same hours on a Saturday or Sunday.
- As an enforcement policy, DOL does not count time spent as a passenger outside your regular working hours.
- Driving between job sites during the workday is work time.
Some integrators pay all travel time regardless, and some salaried roles are exempt from these rules. Ask how the company pays travel and get the answer in writing. State law can be more generous than federal law.
Pay, Per Diem and the Tax Home Question
Integrator pay usually has more moving parts than a plant job: base rate, overtime during startups, travel time, and per diem or expense reimbursement for lodging and meals.
For a federal benchmark, BLS's occupational handbook shows that electrical and electronic engineering technicians working in engineering services, the industry group that includes many integrators, had a median annual wage of $76,900 in May 2025. That figure comes from the BLS Occupational Outlook Handbook. Treat it as a reference point, not a promise, because job titles at integrators do not map neatly onto federal codes. Our automation money guide covers shift and travel premiums in more general terms.
How per diem works
Many employers set per diem using the federal rates published by the General Services Administration. GSA rates follow the federal fiscal year, so a new set takes effect each October 1, and they vary by city. Per diem may be a flat daily amount or actual expenses with receipts.
According to IRS Publication 463, if you account for expenses to your employer and return any excess, you generally do not report the reimbursement as income. Two other rules from that publication matter for traveling technicians:
- Tax home. Your tax home is generally your regular place of business, not necessarily where your family lives. Travel expenses are tied to being away from that tax home.
- The one-year line. An assignment you realistically expect to last one year or less is temporary. If you expect it to last more than a year, that location can become your new tax home, and travel expenses there are no longer treated as away-from-home costs.
Long resident-engineer style assignments at a single customer site are where the one-year rule bites. If an integrator offers one, talk to a tax professional before you assume the per diem stays tax-free.
What You Gain From Integrator Work
The reason so many experienced controls people spent time at integrators is breadth. Plants standardize on one or two platforms to keep spares and training simple. Integrators take whatever the customer specifies. Over a few years you can build working knowledge of multiple PLC families, HMI packages, drives and robot brands, which is hard to get any other way. Our article on Siemens vs. Allen-Bradley explains why that cross-platform skill is valued.
You also see new installs rather than inherited mystery code, learn to read and write documentation that customers will judge you by, and often get exposure to customer-facing work. Those skills transfer directly to controls engineer, project lead and field service lead roles later.
What It Costs You
The tradeoffs are real and worth naming before you accept:
- Time away. Missed weekends, holidays during shutdowns, and stretches where the hotel feels more familiar than home.
- Startup pressure. You are often the last person between a customer and their production date.
- Uneven workload. Integrators live on backlog. A slow quarter can mean shop work, fewer hours or, at small firms, layoffs.
- Less time with one system. You install it, prove it and leave. Plant techs learn the long-term failure patterns of a machine; integrator techs often do not.
How to Evaluate an Integrator Before You Accept
Integrators vary widely in how organized they are, and that organization decides whether your travel is planned or chaotic. One outside signal: CSIA has run a certification program since 2000 that requires members to pass an audit against criteria from its best practices manual and renew every three years. It is not a guarantee, but it means someone outside the company checked how it runs projects.
Ask these questions in the interview, and get the important answers in the offer letter:
- What percentage of the year did field technicians actually travel last year, and how far?
- How is travel time paid: all of it, only during working hours, or not at all?
- Is per diem a flat rate or reimbursed with receipts, and what is the rate based on?
- Who books travel, and do I front expenses on a personal card?
- How long are typical startups, and how often do they run over?
- Will I go to sites alone in my first year, or with a senior tech?
- Which platforms do you work on most, and what training do you provide?
- What happens to my hours when the backlog is light?
Bottom Line
Integrator work is a strong choice if you want to build skills quickly, like variety and can handle travel for a few years. It is a poor fit if you need a predictable schedule or want to master one plant's equipment. The difference between a good integrator job and a bad one is mostly in the details: how travel time is paid, how per diem is handled, how often startups overrun and whether you are sent out with support. Ask for those details in plain numbers before you sign.